Ecusafe 3.0
LINK ===== https://urllio.com/2sBHkF
Stop your programs being stolen at car meetings or at concurrent companies!After reading original file from car and making chip file from it, protection using ECUsafe may be applied. Protected file may be written into ECU using your flash tool (if it calculates file checksum while writing) or you must calculate checksum in external program and then write it into ECU.As a result file stored in ECU cannot be read anymore. Diagnosis protocols are working normally (you can do identification of ECU, diagnosis of error codes, etc etc). ECU can be re-written with any file using your tool (so factory diagnosis systems can upgrade program in ECU, if applicable). ECU cannot be read. Diagnosis protocols work normally.All ECU reading systems will fail to read file from ECU. They can only write (and thus - overwrite your file). To re-enable reading file from ECU, it must be overwritten with non-protected file (file without ECUsafe protection).Following modules can cover your car range:ES3 - VAG EDC16 CP34 (2.5 TDI CR, 2.7 TDI CR, 3.0 TDI CR)All Audi, Volkswagen, Skoda & Seat with TDI common rail engines based on EDC16 ECU.Most popular engines: Audi/VW Touareg 3.0 TDI, Audi 2.7 TDI 180 HP, VW Crafter.ES4 - VAG MED9.1, MED9.5, ME7 (1.6 FSI, 2.0 FSI, 2.0 TFSI, 4.2 FSI)All Audi, Volkswagen, Skoda & Seat TFSI engines and FSI engines with MED9.x ECU.Most popular engines: 2.0 TFSI 200 HP, 230 HP, 170 HP, 240 HP, 265 HP, 2.0 FSI 150 HP, 1.6 FSI, 4.2 FSI (including Porsche Cayenne). Includes ME7 protection (1.8T, 1.8, 2.0)ES5 - BMW EDC17 CP02Includes BMW with 2.0d engine from 118d, 120d, 123d, and bigger models with same engines, controlled by EDC17 CP02 ECU.ES7 - Ford ME9Protects against OBD/CAN reading of Ford ME9. 7211a4ac4a